Image Credits

• Injection molding machine with a robotic part-removal arm

  “Injection Molding Machine with a robot arm” by The robotic engineer1, licensed under CC BY-SA 4.0, via Wikimedia Commons. Resized from the original.

• Open injection mold showing cavity detail and insert locations

  “HTS main frame polymer injection mold” by MobiusDaXter, licensed under CC BY-SA 3.0, via Wikimedia Commons. Resized from the original.

• Two-shot injection molded parts combining two materials in one component

  “Two-shot injection molded keycaps” by Napf, licensed under CC BY-SA 3.0, via Wikimedia Commons. Resized from the original.

• Close-up of a precision injection molded plastic component

  “Micro injection molded part example” by Nalbarian, licensed under CC BY-SA 4.0, via Wikimedia Commons. Resized from the original.

• Clamping unit of an injection molding machine

  “Injection molding machine clamping unit” by PedroCalamaro, licensed under CC BY-SA 4.0, via Wikimedia Commons. Resized from the original.

• Tool steel dies laid out for inspection and repair

  “Magnesium die casting dies” by Swoolverton, licensed under CC BY 3.0, via Wikimedia Commons. Resized from the original.

• High-pressure die casting machine on a production floor

  “Magnesium die casting machine” by Swoolverton, licensed under CC BY 3.0, via Wikimedia Commons. Resized from the original.

• High-pressure die casting bay on a production floor

  “High Pressure Die Casting Bay-Urse Plant” by Mohsina Faiz, licensed under CC BY-SA 4.0, via Wikimedia Commons. Resized from the original.

• Small zinc die cast components showing fine detail and thin walls

  “1990s small zinc die casting samples by Fishercast” by R. Henrik Nilsson, licensed under CC BY 4.0, via Wikimedia Commons. Resized from the original.

• Molten metal being poured in a foundry

  “Casting metal in a foundry ATLIB 330198” by Godber, Albert Percy, licensed under Public domain, via Wikimedia Commons. Resized from the original.

• Center drilling operation on a metal lathe

  “Lathe Center Drilling” by David English, licensed under CC BY-SA 4.0, via Wikimedia Commons. Resized from the original.

• Electrostatic powder coating spray gun applying finish to a part

  “Powder-Coat-Gun” by Alexandros T, licensed under CC BY-SA 4.0, via Wikimedia Commons. Resized from the original.

• CNC milling machine cutting a metal workpiece

  “CNC milling machine” by Impressionmanufacturer, licensed under CC BY-SA 4.0, via Wikimedia Commons. Resized from the original.

• Electronics manufacturing and assembly line

  “EMS-Electronic-Manufacturing-Services” by ECD Electronic Components GmbH Dresden, licensed under CC BY-SA 3.0, via Wikimedia Commons. Resized from the original.

• Coordinate measuring machine performing dimensional inspection

  “Coordinate Measuring Machines” by National Institute of Standards and Technology, licensed under Public domain, via Wikimedia Commons. Resized from the original.

• Controlled cleanroom environment used for medical device work

  “Spire Glasgow Cleanroom 2017” by Quentin Gollier, licensed under CC BY-SA 4.0, via Wikimedia Commons. Resized from the original.

• Industrial equipment manufacturing floor

  “Fabriko de Sichuan Jinxing Compressor Manufacturing Co., Ltd 03” by RG72, licensed under CC BY-SA 4.0, via Wikimedia Commons. Resized from the original.

• Populated printed circuit board assembly

  “PCBA” by Asteelflash Group, licensed under CC BY-SA 4.0, via Wikimedia Commons. Resized from the original.

• Five-axis scanning coordinate measuring machine

  “5 Axis Scanning Coordinate Measurement Machine (CMM)” by AB Technology (Newark) Ltd., licensed under CC BY-SA 4.0, via Wikimedia Commons. Resized from the original.

As Wrex Products photography replaces these images, entries disappear from this page automatically — each is tied to the photo it credits.